I do have a solution for you. Unfortunately, it will not be with the Adarac ladder rack you have on your 2007 Chevrolet Silverado Classic. You can use the Thule TracRac TracONE Truck Bed Ladder Rack - Fixed Mount - 800 lbs - Matte Black, part # TH27000XTB. It has a t-channel that will allow you to mount the Thule Hullavator Pro Kayak Carrier and Lift Assist with Tie-Downs - Side Loading, part # TH898.
I have included a product description link and video review links below. view full answer...
The Gen-Y Glyder Shock Absorbing Ball Mount # 325-GH-12001 has a bolt pattern that is unique to the Glyder. There are currently no Pintle style attachments that share that bolt pattern.
I would recommend changing out your pintle trailer connection for a Pro Series Adjustable-Channel Coupler # PSA200S0303. This will bolt in place on a channel mount to give both trailers a 2" coupler. If you have a different connection on pintle trailer let me know and I will find you the correct adapter... view full answer...
Yes, the Air Lift LoadLifter 7500 XL Air Helper Springs # AL57575 will fit your 2007 Chevy Silverado 2500HD with a fifth wheel hitch installed and be the perfect way to help keep you level and improve the ride of your truck while you are towing.
I also strongly recommend installing the Air Lift WirelessAIR Compressor System # AL74000 with the helper springs because it has a wireless remote control which allows you to adjust the air pressure in each bag from the comfort of your truck's... view full answer...
If you are speaking of the chrome trim piece that covers the entire rear of the mirror, the Snap-On Custom Towing Mirror you referred to # KS80800 is purposely designed for a tight fit over the OEM mirror. The added thickness of the trim piece would prevent the Snap-On mirror from being installed.
The K-Source Universal Clip-On Mirror, part # KS3891 would be your best option. The mirror features a large 5-1/8 by 7-3/4 inch mirror and ratcheting rubber straps that ensure a tight fit. view full answer...
The designs of the Hopkins EasyLift, # 74211, and the DeeZee EZ Down Lowering System, # DZ43100 allows these two products to be installed on your 2007 Chevy Silverado Classic without interfering with each other. Our contact at DeeZee stated these two products should work together, however, they have not been tested together so it is not guaranteed.
Both products can be installed on the same side of the truck (driver side). I included a link to instructions and a video for you. view full answer...
The Titain Chain Ladder Snow Chains # TC2228 are sold as a set of 2 chains. The set will fit one axle of your vehicle.
Also, this set of Titan Chain snow chains will fit the 305/40-22 tire size. view full answer...
According to my technical contact at Curt Manufacturing their Class V Hitch # C15302 will fit your truck, if it were equipped with a standard 265mm wide spare, with about an inch of extra space. The hitch was engineering with this tire size in mind.
With your wider 285mm tire there will be no space between the tire and hitch. The hitch may still bolt up but not without at least contacting the tire. view full answer...
Yes, you can use the Reese Universal installation kit # RP30035 on your 2007 Chevy Silverado (Classic or New Body style) 3500. And it will work with the Reese 5th wheel trailer hitch # RP30047. I have included a link to the installation instructions for the universal install kit for you. view full answer...
I spoke to my contact at Curt about your 2007 Chevrolet Silverado 2500 HD Classic.
They told me the Curt Class V hitch, part # C15312 is designed to fit your truck if it has the factory cutout bumper. They told me that the cutout is the recessed area on the bumper where the license plate typically goes. this hitch has a 2 inch receiver opening.
This hitch should sit right below the bumper and would be just what you are looking for.
If you need a ball mount for the hitch I recommend... view full answer...
Ground clearance is generally not a problem on full size trucks like your 2007 Chevy Silverado 3500. With that said the 2-1/2 inch hitches for the truck do hang fairly low. The Draw-Tite hitches # DT45519 and # DT45517 fit a little tighter to the rear bumper than the other options but only just. view full answer...
Yes, the Curt Trailer Hitch Receiver part # C15312 is a confirmed fit for your 2007 Chevrolet Silverado 3500 Dually 4x4. The Curt Trailer Hitch Receiver is a direct bolt-on fit which means no drilling or cutting is required. If you need a trailer connector we have that as well, the Curt T-Connector Vehicle Wiring Harness part # C55774 which comes with a mounting bracket.
If you need any other parts for your towing setup please just let me know. view full answer...
The RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty # RAS3611-HD you were looking at is confirmed to fit your 2007 Chevrolet Silverado 2500HD as long as it does NOT have the top overload springs.
If your truck does have the top overload springs you will need to go with the # RAS3611-CHD instead.
Both options have the same 3000lb load capacity which will do a great job of preventing sag when towing a trailer or carrying a heavy payload, but will also eliminate axle... view full answer...
Since your 2007 Chevrolet Silverado has a standard 8 foot bed, you do not need to use a sliding fifth wheel hitch. Sliding 5th wheel hitches are intended for use with short bed trucks that may need additional clearance for sharp turns.
There are several options for towing a 5th wheel trailer with the gooseneck ball currently installed in your truck. The safest, and best option is to replace the pin box on the trailer. It sounds like you have not bought the trailer just yet so you might... view full answer...
The Draw-Tite front mount receiver # 65028 has a 2 inch receiver opening so basically any bike carrier that will fit a 2 inch hitch will work. I have included a link to the bike racks we carry that fit a 2 inch receiver.
If you can tell me how many bikes and the types of bikes you wish to carry I can make some recommendations.
You should also know that bikes at the front of a vehicle can reduce driver visibility, air flow to the motor, and block the front lights so keep that in mind as well. view full answer...
The Firestone Ride-Rite Air Helper Springs # F2250 are a great option to add suspension enhancement to your 2007 Chevrolet Silverado 2500HD Classic. You can accommodate the 6 inch lift that your Silverado has by using the Lift Spacers for Firestone Ride-Rite Air Helper Springs # F2374 which are for vehicle with a 6 inch lift. You can verify that these will fit by making sure that the distance between the upper and lower brackets are between 11-1/2 inches and 12-1/2 inches.
Another great... view full answer...
You will need the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1067 to fit your 2007 Chevrolet Silverado 2500HD Classic with a short bed. As you have a short bed you may opt for the 4" Offset Ball # BWGNXA4085. We also have the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness # 41157 which will allow you to add a 7-way connector inside your bed for the trailer to more easily connect and reducing the chance of damage to the harness.
If you will be doing any 5th... view full answer...
In order to replace the ramp door spring on your enclosed trailer you will need to measure the distance between the mounting brackets. For example, the Enclosed Trailer Ramp Heavy Duty Spring part # CB250D96SHD has mounting brackets that can be adjusted to sit 80" - 96" apart. If you have mounting brackets outside of this range then please just let me know what that is so I can make sure your get the correct replacement ramp door spring. view full answer...
The wiring harness you refer to, part # 50-97-410, is a fit for your 2007 Silverado Classic. Later model Ford and Chevy Trucks use the same plug-in connectors for the trailer connectors, but the connectors for Dodge trucks are different. view full answer...
The pilot hole in the center of your wheel is most likely just shy of 5 inches. Normally, it will measure something like 4.90 or 4.88 inches in diameter. Using a precise measurement tool like a dial caliper is the best way to determine the exact measurement of the pilot hole. I have provided a link to all of the wheel covers that we carry for you to review. If you find that one of these measurements is correct for your wheel, the Americana Trailer Wheel Center Cap - Stainless Steel - 4.88... view full answer...
The CE Smith Multi Sport Plus Trailer part # CE48870 and the Malone MicroSport Trailer part # MPG460G which is what the Retractable Tongue Kit for Malone MicroSport Trailers part # MPG494 is designed for both have a 2" x 3" trailer tongue so the Retractable Tongue Kit should in theory work as well but we have not tested this.
The other option you have is a fold-away tongue kit, the Fulton Fold-Away Coupler Hinge Kit part # FHDPB230101 which we do know will work. view full answer...
Go To Results